Desert Tech Accessories

products1.jpg

DT Scope Mount

Desert Tech makes the perfect optics mounting solution for their rifles, out of the same exact material as the chassis, in the form of a beautifully machined 50BMG-rated 6-screw mount with integral bubble level.  Not too high, and not too low like some european-made competitors mounts.  This 100% made in the USA mount is at the perfect height for the SRS, Covert, and HTI but is also a perfect fit on any AR15 or any rifle requiring 1.5" scope height.  

Diameter Slope $
34mm 20moa / 5.7Mils $365
34mm 30moa / 8.5Mils $365
34mm 40moa / 11.4Mils $365

  - 30mm Ring Reducers:  $30


products23.jpg

SKB Hard Case

SKB Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Features a molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage.

Cases include custom cut foam for perfect fit to your Desert Tech rifle and all it's accessories.

SRS Covert$445
SRS$595
HTI$695
products17.jpg

SRS Covert Soft Case

$395

The SRS Covert soft case was made to be as small as possible for maximum concealment and ease of transport. You can stow a complete scoped Covert rifle system, magazines, silencer, and conversion kit (up to a 26” barrel) with the rifle. The case has a shoulder harness and carrying handles. Because of its maximum compactness, this product does not fold out into a shooting mat.


products21.jpg

Operators Maint. Kit

SRS - $395 : HTI - $425

Kit Includes:
Operator Maintenance Case
Snap Seal Sample Container
KG-1 Carbon Remover 2 oz bottle
Torque Wrench 70in/lbs*
Topeak X-Tool (Black)
Socket Hex Bit 5 mm 3/8 Drive
DTA SRS Bore Guide Assy
Cleaning Rod, Dewey 30-Cal 36"
Bore Brush, 30 Cal BB-1
Bore Brush, .338 Rifle Bronze
.30 Rifle Bore Snake
.338 Rifle Bore Snake
Gun Cleaning Brush
1100 Rapid Rod Gun Cleaning Rod
Lens Pen Optics Kit: MiniPro ll, Micro cloth
Cleaning Patches, #4 Round 2 ¼", 50/pkg

*80in/lbs for HTI

products18.jpg

SRS Soft Case

$495

The SRS Soft Case/Shooting Mat provides the operator on-board storage of the SRS rifle, magazines, silencer, conversion kits, and cleaning rod in a compact and portable field case that can be folded out into a comfortable shooting mat. Storage pouches are conveniently placed to allow immediate access while shooting prone. 

Case shoulder straps and carrying handles make it easy to transport. The shoulder straps can also be moved into a pouch on the rear of the pack, keeping them from getting tangled when not in use. MOLLE webbing for outside accessory attachment.


products24.jpg

Bore Guide

SRS - $40  :  HTI - $50

Make cleaning your SRS & HTI barrels simple and easy by removing the risk of damaging the barrel during cleaning. The Desert Tech bore guide fits snug inside SRS & HTI barrel extensions, guiding the cleaning rod straight through the barrel, helping to avoid misalignment that cause barrel damage.

products19.jpg

HTI Soft Case

$595

The HTI Soft Case/Shooting Mat provides the operator on-board storage of the HTI rifle, magazines, silencer, conversion kits, and cleaning rod in a compact and portable field case that can be folded out into a comfortable shooting mat. Storage pouches are conveniently placed to allow immediate access while shooting prone. 

Case shoulder straps and carrying handles make it easy to transport. The shoulder straps can also be moved into a pouch on the rear of the pack, keeping them from getting tangled when not in use. MOLLE webbing for outside accessory attachment.


products25.jpg

Seekonk Wrench

SRS - $125 : HTI - $135

SRS rifles require a 70-inch/pound Seekonk torque wrench with 5mm socket for repeatable SRS conversion kit and scope mount installations.

HTI rifles require a 80-inch/pound Seekonk torque wrench with 5mm socket for repeatable HTI conversion kit and scope mount installations.

Call Us Today To Order!    605-554-1911

Primal Rights, Inc
33 3rd St SE STE 101
Huron, SD 57350

© Copyright 2009-2016 Primal Rights Inc
ALL RIGHTS RESERVED

No part of this website may be reproduced, distributed, or transmitted in any form or by any means without the express prior written permission of Primal Rights, Inc