6BR AICS Drop-In Magazine Conversion

The 6BR AICS Magazine Conversion was designed to address the need for reliable feeding of short standard bolt face cartridges such as the 6BR, 6.5 Grendel, 6 Dasher, and 6BRX. If you have ever tried to run 6BR out of a standard un-modified AICS magazine, you were probably met with the same disappointment the rest of us were. Very unreliable feeding. This conversion is a collaboration between Primal Rights, Inc and TS Customs. Travis Stevens of TS Customs is a very accomplished PRS competitor, and has been using the small 6MM cartridges with great success for the last several years. This conversion has helped him to ensure 100% reliable feeding with the cartridges of his choice.

The 6BR AICS conversion has been tested extensively with 6BR, 6.5 Grendel, 6 Dasher, and 6BRX. Thousands of rounds of trouble free operation have been seen with these cartridges when using our modification. There are several other cartridges that will benefit from the use of these conversions as well, though those have not been tested as thoroughly. This conversion is for 10 ROUND MAGAZINES and colors may vary.

Kits are available in 10rnd or 4+1 configuration. 


Desert Tech Non-Rotating Flush Cup

These aluminum non-rotating flush cup mounts are designed to allow you to put a flush cup anywhere you like on the handguard of Desert Tech SRS-A1, SRS-A1 Covert, and HTI rifles.  

Ships with screws.  


Desert Tech Aluminum Pic Rail - 3" 

These aluminum picatinny rail sections are designed to replace the polymer rail sections which are standard on Desert Tech SRS-A1, SRS-A1 Covert, and HTI rifles.  

Ships with screws. 


TS Customs Quick Adjust Knob 

For KMW Cheekpiece Hardware.

The TS Customs QA Knob was built to allow any users of stocks with KMW adjustable cheekpiece hardware to quickly and easily adjust or remove their cheekpiece without the use of tools. You will no longer have to hunt down that 3/16" allen wrench to remove your cheekpiece for bolt removal or barrel cleaning! The TS QA Knob is made of 6061 aluminum, finished in a hardcoat anodize with a grade 8 socket cap screw. The TS QA knob will work with any KMW equipped stock.


The TS Customs Quick-Adjust knob will NOT work with any Bell & Carlson adjustable stocks, any factory McMillan cheekpiece hardwares, LRI ULTACH 2.4 hardware, or any Karsten-style saddle cheekpieces.


Orders placed online ship for free!

Primal Rights, Inc
33 3rd St SE STE 101
Huron, SD 57350
© Copyright 2009-2017 Primal Rights Inc 
ALL RIGHTS RESERVED
No part of this website or any of its content may be reproduced, distributed, or transmitted in any form or by any means without the express prior written permission of Primal Rights, Inc